kntgsp
Sep 14, 10:28 AM
bmustaf
I agree with you on the points that Apple does need a reminder of where it stands in the consumer/producer relationship every now and then, just as any other company does. Consumer Reports generally does a good job with facilitating this. I'd much rather a major publication start taking Apple to task about not allowing sideloading/locking down the device though to be honest.
My issue, from a personal viewpoint as an iPhone and Android user, is the way the iPhone4 antenna issue was approached and in my opinion blown out of proportion in terms of the net effect.
Yes the phone suffers a -20dB attenuation when you hold the device and bridge that antenna. My HTC Desire gave me a -14dB attenuation when I held it in one hand and my Galaxy S gives me -18dB when holding it in one hand. The only difference is that the attenuation on the iPhone4 is possible by simply bridging that antenna with your pinky finger rather than needing to hold the device.
The point there is that how often does someone do that where they lay a device on a table and touch that particular spot with a pinky finger? Or why would someone do that? The issue is that the signal attenuates when the device is held. But every phone suffers that to some degree, with even phones that have internal antennas giving comparable attenuation when held in your hand.
They focused quite a bit on "if I touch the device just like this when it's laying down it gives me the attenuation" despite the fact no one does that. They should have looked at it from a net user experience, where "does a -20dB attenuation make a phone not recommendable compared to a phone with only a -15dB attenuation" being the more deciding factor.
To me personally, I can't see how someone can recommend a phone that gives you -15 to -18dB attenuation when held and then not recommend a phone that gives you -20dB simply because it can also be reproduced by touching a marked spot with your pinky if the device is laying on a table. That's not to say that Apple should be proud that their phone also attenuates (and usually more so by varying degrees), but where's the cutoff?
Is -19dB the maximum allowable attenuation before you say something isn't recommendable? I think that's a fair question to ask.
I agree with you on the points that Apple does need a reminder of where it stands in the consumer/producer relationship every now and then, just as any other company does. Consumer Reports generally does a good job with facilitating this. I'd much rather a major publication start taking Apple to task about not allowing sideloading/locking down the device though to be honest.
My issue, from a personal viewpoint as an iPhone and Android user, is the way the iPhone4 antenna issue was approached and in my opinion blown out of proportion in terms of the net effect.
Yes the phone suffers a -20dB attenuation when you hold the device and bridge that antenna. My HTC Desire gave me a -14dB attenuation when I held it in one hand and my Galaxy S gives me -18dB when holding it in one hand. The only difference is that the attenuation on the iPhone4 is possible by simply bridging that antenna with your pinky finger rather than needing to hold the device.
The point there is that how often does someone do that where they lay a device on a table and touch that particular spot with a pinky finger? Or why would someone do that? The issue is that the signal attenuates when the device is held. But every phone suffers that to some degree, with even phones that have internal antennas giving comparable attenuation when held in your hand.
They focused quite a bit on "if I touch the device just like this when it's laying down it gives me the attenuation" despite the fact no one does that. They should have looked at it from a net user experience, where "does a -20dB attenuation make a phone not recommendable compared to a phone with only a -15dB attenuation" being the more deciding factor.
To me personally, I can't see how someone can recommend a phone that gives you -15 to -18dB attenuation when held and then not recommend a phone that gives you -20dB simply because it can also be reproduced by touching a marked spot with your pinky if the device is laying on a table. That's not to say that Apple should be proud that their phone also attenuates (and usually more so by varying degrees), but where's the cutoff?
Is -19dB the maximum allowable attenuation before you say something isn't recommendable? I think that's a fair question to ask.
aiqw9182
Mar 24, 04:46 PM
On the server, AMD has inexpensive 12-core, 4-way CPUs since some time. Now going for 16-core with Bulldozer (well, now it will be more like 16-core integer/8-core floating point).
The absolute bargain now are the 8-core, 4-way CPUs. You can have a 32-core machine for very little money.
The the next Atom will have a DirectX 10.1 GPU, meanwhile Bobcat Fusion already has DirectX 11 hardware and OpenCL.
AMD's CPU's are trash and they're cheap for a reason.
Oh and for someone who doesn't use Windows you sure seem interested in Windows only API's. Love all of those OpenCL applications you listed by the way. ;)
The absolute bargain now are the 8-core, 4-way CPUs. You can have a 32-core machine for very little money.
The the next Atom will have a DirectX 10.1 GPU, meanwhile Bobcat Fusion already has DirectX 11 hardware and OpenCL.
AMD's CPU's are trash and they're cheap for a reason.
Oh and for someone who doesn't use Windows you sure seem interested in Windows only API's. Love all of those OpenCL applications you listed by the way. ;)
TheBobcat
Nov 29, 03:57 PM
My guess would be too much cost for such a small market. There's not a lot of 1080p content out there and even less 1080p displays. For a first gen device, I think 720p would be good enough. Maybe even 480p if it's cheap enough.
Although, in the end it'll probably depend on bandwidth limitations. They never said what protocol they'll be using. Some are assuming 802.11n, but that would limit them to the newest Intel Macs with a firmware upgrade.
True, but two things with that. First, 1080p is expanding rapidly, and it would seem unApple to not go all out with supporting an emerging standard.
Second, didn't iTV have an ethernet jack? If it was wired, they could stream whatever they wanted at almost any res if you had a fast enough network.
Maybe it would limit or upconvert if you were wireless only.
Although, in the end it'll probably depend on bandwidth limitations. They never said what protocol they'll be using. Some are assuming 802.11n, but that would limit them to the newest Intel Macs with a firmware upgrade.
True, but two things with that. First, 1080p is expanding rapidly, and it would seem unApple to not go all out with supporting an emerging standard.
Second, didn't iTV have an ethernet jack? If it was wired, they could stream whatever they wanted at almost any res if you had a fast enough network.
Maybe it would limit or upconvert if you were wireless only.
Slix
Mar 26, 02:49 PM
This looks pretty amazing.
pimjai
Sep 18, 03:36 AM
are there any sleeves yet?
Evangelion
Jul 14, 07:26 AM
It'll take a while before B-spec becomes too slow for web surfing ;)
But there are lots of people who use the wireless for more than just web-surfing. Hell, WLAN is used at my workplace quite extensively in place of wired ethernet. That was the whole point of my comment. I (among others) use network-connectivity (wired or otherwise) for other things besides web-surfing
As to just web-surfing.... In the time of few years my internet-connection has moved from 512KB to 8MB. I could go to 12 or 24MB right now. The speed-increase has been FAST.
But there are lots of people who use the wireless for more than just web-surfing. Hell, WLAN is used at my workplace quite extensively in place of wired ethernet. That was the whole point of my comment. I (among others) use network-connectivity (wired or otherwise) for other things besides web-surfing
As to just web-surfing.... In the time of few years my internet-connection has moved from 512KB to 8MB. I could go to 12 or 24MB right now. The speed-increase has been FAST.
RaceTripper
Jan 31, 04:27 PM
imo, it needs deep dish wheels.. (or ronal turbo's)
still it's a nice ride non the less!Deep dish wheels are great, if they don't stick out the wheel wells from exaggerated width like a ghetto whip.
still it's a nice ride non the less!Deep dish wheels are great, if they don't stick out the wheel wells from exaggerated width like a ghetto whip.
Cliff3
Jan 5, 11:41 PM
the guy looks like he really took care of the car (based on his ad). The pictures make it seem mint, and he says all maintenance has been done regularly.
As I said before, there is no substitute for a thorough pre-purchase inspection by a competent BMW shop. These cars can be money pits.
I found the bimmerforums site a few days ago and have been searching quite a bit. Nothing I am finding seems out of the ordinary, or something I haven't seen yet.
Bimmerforums is mainly an E36 site. Bimmerfest is a better E46 resource.
As I said before, there is no substitute for a thorough pre-purchase inspection by a competent BMW shop. These cars can be money pits.
I found the bimmerforums site a few days ago and have been searching quite a bit. Nothing I am finding seems out of the ordinary, or something I haven't seen yet.
Bimmerforums is mainly an E36 site. Bimmerfest is a better E46 resource.
jgould
Feb 27, 06:58 PM
http://farm6.static.flickr.com/5260/5483175217_83c32f59b9_b.jpg
What did you unplug before taking the picture? :o
What did you unplug before taking the picture? :o
63dot
Jan 5, 09:05 PM
The MB W201 (1982-1993) was a brilliant small sedan, and you can still find them on the road today. Like any other German car, if you maintain it properly, it will run forever.
German, English, and Italian cars right out of the dealership are the coolest, best performing, best designed machines out there. And yes, they all need proper care.
It just that there are cars like cockroaches (not too expensive like a Carrera or Lambo and in no way as sexy) but they don't die, even when they are abused. Toyota pickups, Honda Accords (stock, not riced), and Volvos of old don't win style points, but they have the longevity that is legendary.
One of the coolest cars out there are most Jaguars from the 1970s until now, but I can't think of a car that breaks down more often, or is never seen in public if more than ten years old. There is no excuse for that. It's much more acceptable when a ten year old Yugo is not out on the road (when they hit that age back in the past) because they were very inexpensive. But at the same time period, dumping $25K or more into an XJ only to spend thousands more on repair on a car you would have to eventually sell is not acceptable.
A lawyer friend of mine got divorced and had to get rid of a car. She lived in a small, rented house and had no use for two cars. She was down to a rather new Honda Accord or a nice metallic green Jaguar 12 cylinder. She kept the Jag and dumped the Accord, which she got for top dollar. A few years later, she dumped the Jag. Not only was there the typical Jag problems that plague the maker, but the sun (near the ocean) did a job on the metallic green paintjob as it does to all metallic green paint jobs.
German, English, and Italian cars right out of the dealership are the coolest, best performing, best designed machines out there. And yes, they all need proper care.
It just that there are cars like cockroaches (not too expensive like a Carrera or Lambo and in no way as sexy) but they don't die, even when they are abused. Toyota pickups, Honda Accords (stock, not riced), and Volvos of old don't win style points, but they have the longevity that is legendary.
One of the coolest cars out there are most Jaguars from the 1970s until now, but I can't think of a car that breaks down more often, or is never seen in public if more than ten years old. There is no excuse for that. It's much more acceptable when a ten year old Yugo is not out on the road (when they hit that age back in the past) because they were very inexpensive. But at the same time period, dumping $25K or more into an XJ only to spend thousands more on repair on a car you would have to eventually sell is not acceptable.
A lawyer friend of mine got divorced and had to get rid of a car. She lived in a small, rented house and had no use for two cars. She was down to a rather new Honda Accord or a nice metallic green Jaguar 12 cylinder. She kept the Jag and dumped the Accord, which she got for top dollar. A few years later, she dumped the Jag. Not only was there the typical Jag problems that plague the maker, but the sun (near the ocean) did a job on the metallic green paintjob as it does to all metallic green paint jobs.
matznentosh
Oct 23, 08:48 AM
You do know that you'll be getting a US-formatted keyboard and AC adapter, yes?
Don't forget the AC adapter works on UK voltage, you just need the plug adapter.
Don't forget the AC adapter works on UK voltage, you just need the plug adapter.
cleanup
Nov 27, 12:29 PM
Just got done framing (: took me a minute too.
http://img220.imageshack.us/img220/4916/photore.jpg
I like this. I really wish it didn't have the logo, though. Much classier as just a photograph, IMHO.
http://img220.imageshack.us/img220/4916/photore.jpg
I like this. I really wish it didn't have the logo, though. Much classier as just a photograph, IMHO.
milo
Aug 30, 07:38 AM
Those prices might not be valid anymore. And could you mention any of the reasons why anyone would use Yonah instead of Merom, if the prices are identical (more or less)?
Nobody would. But the prices likely won't stay identical - as you point out, unless intel drops yonah prices, they probably won't be able to unload their remaining yonah chips. Just because a price drop hasn't been announced yet doesn't mean it's not going to happen.
Nobody would. But the prices likely won't stay identical - as you point out, unless intel drops yonah prices, they probably won't be able to unload their remaining yonah chips. Just because a price drop hasn't been announced yet doesn't mean it's not going to happen.
Agaetis Byrjun
Feb 22, 09:47 PM
Those toolboxes are quite expensive. Any reason you chose one of those over, say, a plastic rolling cart from Ikea?
No Ikea for about 500 miles from me. They made a ton of different series from cheap crap to the really nice stuff. Mine was the middle on the line and was $179.00 on sales.
No Ikea for about 500 miles from me. They made a ton of different series from cheap crap to the really nice stuff. Mine was the middle on the line and was $179.00 on sales.
brazos
Nov 27, 02:12 PM
I wish Apple would come out with a 17" LCD monitor that has the same form factor as the 17" MacbookPro. Instead of a keyboard, computer, it could just have a large battery in the base to power the display and provide additional power out to a Macbook Pro or Macbook. Assuming it had a DVI out, I could use it as an extended desktop with my MacbookPro on the go with out the need for additional power (in fact, it could extend the runtime of the Macbook as well). And best of all, the whole thing would fit in my carryon bag. If Apple doesn't come out with this, I wish someone else would...
needthephone
Jan 2, 04:19 AM
Personally speaking I can't get excited about software. An OS is an OS windows, OSX I don't care as long as it works (OK advantage Apple but if MS did the job I would use it) Ilife come on, surely something not as dull as free software no one uses.
Please let it be new stuff you can hold.
Please let it be new stuff you can hold.
umag
Feb 21, 04:28 PM
Hi, can anyone explain me how is the Cinema Display 30" "flying" in Transporteur's 2007 setup (page 79, Part 13)? :confused:
Is he using a VESA wall mount?
Thanks!
Is he using a VESA wall mount?
Thanks!
bokdol
Mar 24, 01:14 PM
i would love to buy an off the shelf gpu for half the price of a mac branded amd card. please let this be true then i will not sell my 2008 macpro
VPrime
Jan 5, 10:21 PM
Sounds good then, but keep in mind the sheer downtime you will have, even if you do the repairs yourself.
FTR my E36 was a complete cream puff, one owner, full service records and regular maintenance--and it was the biggest piece of crap I ever had. I unloaded it needing $4500 worth of work, on top of the massive piles of money I had to throw into it over my four years.
Good luck, but you have been warned.;)
heh down time is nothing. My last toy was down for 2 years ;)
FTR my E36 was a complete cream puff, one owner, full service records and regular maintenance--and it was the biggest piece of crap I ever had. I unloaded it needing $4500 worth of work, on top of the massive piles of money I had to throw into it over my four years.
Good luck, but you have been warned.;)
heh down time is nothing. My last toy was down for 2 years ;)
pje65
Sep 21, 08:09 PM
Hi, everyone.
I'm new iPod Touches, though I've had some other iPods over the years. I'm a teacher, and decided that I'd use the Bento app on it to keep track of my students' progress at school. My niece rolled her eyes and informed me that I'd need a case and screen protector. So, I went to Best Buy today and got the Griffin Gloss and the Invisishield. I put on the case, which seems to work fine. Then I opened the shield and got a good look at it. It immediately occurred to me that I'd probably need to take off the case, put the shield on, then put the case back on. However, the case--which consists of two pieces of hard plastic that intersect in the middle after installation--won't budge. I'm sure I could get it off, but I'm not sure I could do so without doing significant damage to the case. These things are supposed to be removable, aren't they? Also, would it be a big deal not to have a screen protector on it? I'm going to be using it a lot in multiple locations. It's probably going to get bounced around on a regular basis.
Thanks,
Pete
I'm new iPod Touches, though I've had some other iPods over the years. I'm a teacher, and decided that I'd use the Bento app on it to keep track of my students' progress at school. My niece rolled her eyes and informed me that I'd need a case and screen protector. So, I went to Best Buy today and got the Griffin Gloss and the Invisishield. I put on the case, which seems to work fine. Then I opened the shield and got a good look at it. It immediately occurred to me that I'd probably need to take off the case, put the shield on, then put the case back on. However, the case--which consists of two pieces of hard plastic that intersect in the middle after installation--won't budge. I'm sure I could get it off, but I'm not sure I could do so without doing significant damage to the case. These things are supposed to be removable, aren't they? Also, would it be a big deal not to have a screen protector on it? I'm going to be using it a lot in multiple locations. It's probably going to get bounced around on a regular basis.
Thanks,
Pete
sfwalter
Jul 19, 03:47 PM
Those analysts really need to do their homework. They brought Apple's stock down because of their negativity. Since they were wrong I think the analysts need to reimburse shareholders for lost money :).
AFPoster
Mar 22, 01:13 PM
The only choice these friends of yours made was to try and fit in with straight culture.
They were always gay. They chose to be straight� and that never works out.
Colour me sceptic.
Back and forth with emails confessing they chose to be gay? Oh come on.
FYI, I made a choice about my career� tonight's dinner, my brand of underwear� I did not choose to be gay. No more than you made a choice to be (I assume) straight. Or� did you� which brings me back to your gay/straight switching friends. Perhaps time to do some more emailing? Talk things over with them? No need to be so deep in that dark closet.
If they chose to be straight and that didn't work out that's beyond me. I am not gay so I can't understand the situation since being straight is considered "normal" in this society.
I don't agree that this is right, whether my comments may seem to differ from that, I believe Gays deserve all = rights as straights receive, including marriage and joint income returns + names on the home deed.
I can ask my friends all sorts of questions, but I don't think it will do any good since they gave there answers already.
They were always gay. They chose to be straight� and that never works out.
Colour me sceptic.
Back and forth with emails confessing they chose to be gay? Oh come on.
FYI, I made a choice about my career� tonight's dinner, my brand of underwear� I did not choose to be gay. No more than you made a choice to be (I assume) straight. Or� did you� which brings me back to your gay/straight switching friends. Perhaps time to do some more emailing? Talk things over with them? No need to be so deep in that dark closet.
If they chose to be straight and that didn't work out that's beyond me. I am not gay so I can't understand the situation since being straight is considered "normal" in this society.
I don't agree that this is right, whether my comments may seem to differ from that, I believe Gays deserve all = rights as straights receive, including marriage and joint income returns + names on the home deed.
I can ask my friends all sorts of questions, but I don't think it will do any good since they gave there answers already.
KonaBlend
Apr 12, 10:19 PM
This is so that each eye receives 24fps for 3d. So finally 3d will now look like a 3d "movie" rather than a 3d flip book.
err that would be 48 fps for each eye. the current 24 fps for each eye is what Cameron wants to improve upon.
err that would be 48 fps for each eye. the current 24 fps for each eye is what Cameron wants to improve upon.
suzerain
Jul 21, 02:22 AM
Then you can't know that many people, I think you're forgetting there are still people outside of the US, and over here there still is a huge unexplored market for movie rentals. There are no companies that provide services like Netflix, and stores rule the market. If Apple uses the iTunes name for Movie Rentals, it will be a succes in Europe, either way.
Does Apple even offer TV downloads in Europe yet?
Does Apple even offer TV downloads in Europe yet?
No comments:
Post a Comment